Enviro D-Rust concentrate is an aqueous neutral solution designed to be used as a soak immersion to remove all rust from steel and iron through selective chelation.
Enviro-D-Rust concentrate can be diluted up to 90% with plain tap water for moderate rust removal or 50% in more severe rust. Soak times can vary from as quick as 15 minutes to 24 hours in extreme cases at room temperature (preferably above 200C). Faster effectiveness may be achieved through heating.
Enviro D-Rust can be used in a number of applications including rust removal from automotive parts, inside fuel tanks as well as engine block cooling systems. Marine and fishing equipment, household tools, industrial etc.
Since Enviro-D-Rust is neutral, no special equipment is needed. The product is non-toxic and can be used in environmentally sensitive areas. Enviro D-Rust will not harm plastics, wood, paint, copper, alloys, copper or brass and will have no effect on raw metals, it will only react with oxidized iron or steel.
Enviro D-Rust will continue working until the active ingredients are depleted. 1 liter of diluted Enviro D-Rust can de-rust up to 40 kg of rusted steel.
- Dilute 1-part Enviro D-Rust with up to 9-parts tap water according to rust severity
- Clean rusted article of any loose rust and dirt as best as possible
- Submerge rusted article in Enviro D-Rust using a suitable container
- Rinse de-rusted article in plain water after rust has sufficiently been removed
It is advised that safety goggles and gloves be used to avoid contact with sensitive skin.